Original
By certification 
Â
We supply all kinds of diamond sintering graphite mold. It is widely applied in non-ferrous metal metallurgy.
sintering graphite mold has the characteristics of anti-oxidation, anti-high temperature, easy ejection, high dimensional accuracy, high purity, high density, anti-corrosion, heat resistance, and high utilization.
Â
|
Technical Specification |
YG-4 |
YG-5 |
YG-6 |
|
Volume Density (g/cm³) |
≥1.75 |
≥1.85 |
≥1.90 |
|
Electric Resistivity (μΩm) |
10-13 |
8-10 |
8-9 |
|
Thermal Conductivity(100℃) W/m.k |
121.1 |
139.2 |
140 |
|
Coefficient Thermal Expansion (Indoor temperature 600℃)10 |
5.46 |
4.8 |
4.5 |
|
Shore Hardness HSD |
42 |
48 |
53 |
|
Flexural Strength Mpa |
38 |
48 |
55 |
|
Compressive Strehgth Mpa |
65 |
85 |
95 |
|
Elasticity Modulus Gpa |
9 |
11.8 |
12 |
|
Gas Hole Ratio % |
17 |
13 |
11 |
|
Ash content PPM |
500 |
500 |
/ |
|
Granularity (μm) |
13-15 |
13-15 |
8-10 |
Â
Â
Thermal stability: Specially design the production procedure to ensure the reliability of product quality.
Corrosion resistance: Well-proportioned and fine design will delay the erosion of crucible.
Impact resistance: Graphite crucible can bear high thermal impact
Acid resistance: The special materials will greatly improve the quality of mold, especially its index of acid resistance
High heat Conduction: it can shorten dissolution time & reduce the energy consumption.
High temperature resistance & oxidation resistance
Â
Â
Graphite sintering mould for diamond tools are mainly applied to the building materials and exploration field.
It is widely used for diamond saw, diamond segments, diamond wire saw, diamond cutting blades industry.
Â
Â
Â
Â
Our graphite products are packed by wooden cases or cartons with foam board, attached with packing list at the same time. The content includes: type, specification, number, quantity or weight, manufacturer, production date, origin, etc.
Â
Â
Henan YiGuan Te Carbon is established in 2004, we had in graphite mold field over 20 years.
We are capable of graphite products and graphite accessories, and can offer the most advanced manufacturing capabilities available, including custom molding and machining.
Â
Â
Q: Are you a Manufacture Factory?
A: Yes. We are the Direct Manufacture Factory which is specialized in graphite products for over 20 years.
Â
Q: How could i get a quotation?
A: We need the drawing of the graphite mold with dimensions, quantity & application of the graphite products.
Â
Q: What is the lead time for sample and bulk order?
A: Normally 3-5 days for sample, 7-15 days for bulk order.
Â
Q: Do you have stock?
A: No,all of our graphite products are customized produced according to customer’s requirements. It also means material, density, shape, size, etc. depending on what you require.
Â
Q: Can we add our LOGO?
A: Yes, we can print your logo on the graphite mold as your requirement.
http://www.yggraphite.com/
