Basic Info
Material: Plastic
Ethylene Oxide Sterilization: Ethylene Oxide Sterilization
Group: Adult Children
Color: Transparent
Sample: Free
Trademark: HOLINX or OEM
Specification: CE TUV
HS Code: 9018390000
Type: Infusion Set
Certification: CE, TUV, ISO13485
Quality Guarantee Period: Two Years
Logo Printing: Without Logo Printing
Name: Fluid Set
Using: Disposable
OEM: Yes
Transport Package: PE&Blister Packing, PE
Origin: Jiangsu China
Product Description:
Disposable IV Infusion Set with Y Injection Port have the properties: Easy-holding and easy puncturing spike; transparent and flexible tube against winding and twisting; nice regulator which can make the flow rate change from minimum to maximum.
The product is used to infusing liquid medicine.
Product Feature:
1, Infusion tube (PVC)
2, Spike (ABS) with or w/o air vent (with protective cap)
3, Drip Chamber (PVC) with or without fluid filter ( fluid filter nominal pore sizeof 15 μm )
4, Flow regulator (ABS or PE)
5, Injection site (Natural latex or latex free, Y type injection)
6, Luer slip or luer lock fitting (with or w/o needle)
7, PE or blister individual package
8, Sterile by EO gas; sterile, non-toxic, pyrogen free
9, Infusion set for single use, gravity feed only.
10, Standard: CE, ISO,TUV.
11, scope of application: disposable use of venous tranfusion , hypodermic injection in clinic
12, Warns: single use only.,reuse is forbiden.stop use if the pack is damaged
13, Advantages: Technical workers and machines Highly sharp needle points,light punture force,less pain to patient
Specification:
FAQ
Q 1: Do you have any MOQ?
A:Yes,MOQ is 10000pcs.
Q 2: What is the lead time?
A:Sample time 1-5days,mass production 35days for order less than 100000pcs
Q 3: Can we put our logo on packages and products?If yes ,what you need from us?
A :Yes,we can achieve it by silkscreen ,laser etching on products, and higher quaity printing on package with full color etc. Need your logo Ai Format or EPS.
Q 4: Could you offer the dummy sample even pre-production sample before I place the order?
A :Yes,both could be offered for confirmation.
Q 5: If I do not like the color, could I change the color ?
A: No, this model on have one standard color.
Q 6: How should I pay for you if I place order to you?
Disposable IV Infusion Set with Y Injection Port have the properties: Easy-holding and easy puncturing spike; transparent and flexible tube against winding and twisting; nice regulator which can make the flow rate change from minimum to maximum.
The product is used to infusing liquid medicine.
Product Feature:
1, Infusion tube (PVC)
2, Spike (ABS) with or w/o air vent (with protective cap)
3, Drip Chamber (PVC) with or without fluid filter ( fluid filter nominal pore sizeof 15 μm )
4, Flow regulator (ABS or PE)
5, Injection site (Natural latex or latex free, Y type injection)
6, Luer slip or luer lock fitting (with or w/o needle)
7, PE or blister individual package
8, Sterile by EO gas; sterile, non-toxic, pyrogen free
9, Infusion set for single use, gravity feed only.
10, Standard: CE, ISO,TUV.
11, scope of application: disposable use of venous tranfusion , hypodermic injection in clinic
12, Warns: single use only.,reuse is forbiden.stop use if the pack is damaged
13, Advantages: Technical workers and machines Highly sharp needle points,light punture force,less pain to patient
Specification:
Product Name: Disposable Infusion Set | ||
Code | Specification | MOQ |
IV0427 | Wing Spike with air inlet and filter Transparent drip chamber with 15 micron liquid filter PVC tube 150cm PP flow regulator with blue roller Y injection Port Luer lock connector with needle 21Gx1 1/2" |
50,000pcs |
IV0431 | Spike with air inlet and filter Transparent drip chamber with 15 micron liquid filter PVC elastic frosted tube 150cm ABS flow regulator with roller Y injection Port Luer lock connector with big cap |
50,000pcs |
IV0433 | Wing spike with air inlet and filter Transparent drip chamber with 15 micron liquid filter PVC tube 150cm ABS flow regulator with roller I.V. flow regulator 5-250ml/hour Y injection Port Luer lock connector with big cap |
50,000pcs |
IV0465 | Spike with air inlet and filter Transparent chamber with 15 micron liquid filter PVC elastic frosted tube with Y site injection port Latex injection bulb Luer slip connector without wings With needle 21Gx1 1/2" |
50,000pcs |
FAQ
Q 1: Do you have any MOQ?
A:Yes,MOQ is 10000pcs.
Q 2: What is the lead time?
A:Sample time 1-5days,mass production 35days for order less than 100000pcs
Q 3: Can we put our logo on packages and products?If yes ,what you need from us?
A :Yes,we can achieve it by silkscreen ,laser etching on products, and higher quaity printing on package with full color etc. Need your logo Ai Format or EPS.
Q 4: Could you offer the dummy sample even pre-production sample before I place the order?
A :Yes,both could be offered for confirmation.
Q 5: If I do not like the color, could I change the color ?
A: No, this model on have one standard color.
Q 6: How should I pay for you if I place order to you?
A :Usually, the Payment terms Paypal ,T/T ,West Union could be accepted.30%deposit in advance,70% paid before the shipment.