Brand:SDI200 Pro
SDI200 Pro
Supported OS
· Windows7/8/8.1/2008/2008 R2/2012 (x86 & x64)
· Linux (V4L2 kernel driver source code under NDA, supports x86, x64 & arm architecture)
Supported APIs
· Windows
· DirectShow
· DirectKS
· Wave API/DirectSound/WASAPI
· Linux
· V4L2
· ALSA
Supported Software
· VLC
· VirtualDub
· OBS
· xSplit
· vMix
· VidBlaster
· Wirecast
· Microsoft Media Encoder
· Adobe Flash Media Encoder
· Any other DirectShow/V4L2 encoding/streaming software
Input Features
· Support for input video resolutions up to 2048×2048 pixels
SDI Specific Features
· Integrated cable equalizer supporting cable lengths up to 230M for HD signals
· Support for SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS standards
· Support for 2K (2048×1080) mode
· Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
· Support for 10/12-bit color depth
· Support for extraction of SMPTE 352 payload identifier
· Support for up to 8 audio channels at 48KHz
· Support for extraction of audio formation information & channel status data
· Limited support of 3Gb-DS: only the first stream can be captured
· Limited support of 3Gb-DL:
· 2K YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60
· Other modes: full supported
· Limited support for capture of the first link of dual link interfaces:
· YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60
· YCbCr 4:4:4 10-bit: captured as 4:2:2
· RGB 4:4:4: R/B sub-sampled
Video Output Formats
· Support for output image resolutions up to 2048×2048 pixels
· Support for output frame rates up to 120fps. (Actual output frame rate can be limited by PCIe bandwidth, and at higher image resolutions – above 1280×1024 – by the pixel clock of the on-board video processing hardware. eg. Max frame rate at 1920×1080 = ~80fps. )
· Support for 4:2:0 8-bit output formats: NV12, I420, YV12
· Support for 4:2:2 8-bit output formats: YUY2, YUYV, UYVY
· Support for 4:4:4 8-bit output formats: V308, IYU2, V408, BGR24, BGR32
· Support for 4:4:4 10-bit output formats: V410, Y410
· More output formats are supported via Pro Capture SDK for DirectKS
Video Processing Features
· Two video processing pipelines with ~180Mpixels/s processing bandwidth for each one
· Full 10-bit video processing
· Video cropping
· Video scaling
· Video de-interlacing
· Wave
· Blend top & bottom field
· Top field only
· Bottom field only
· Video aspect ratio conversion
· Auto or manual selection of input aspect ratio
· Auto or manual selection of output aspect ratio
· Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)
· Video color format conversion
· Auto or manual selection of input color format & quantization range
· Auto or manual selection of output color format, quantization range & saturation range
· Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
· Support for Limited or Full quantization range
· Support for Limited, Full & ‘Extended gamut’ saturation range
· Video frame rate conversion
· Video OSD composition
· Support for PNG OSD image (up to 2048×2048)
· Support for dynamic loading of RGBA OSD image via SDK
Input Interfaces
· 2x BNC
· SD/HD/3G SDI
Output Interfaces
· PCIe Gen2 x4
· 2x SMA (SDI loopback)
Multiple Cards per System
· Support for multiple cards plugged to one system
· On-board rotary switch to set card number, with 16 positions from 0 to F
· System hardware device tree will display “01: Pro Capture AIO” when rotary switch is set to 1, and so on
· The video and audio device names displayed in your software will include the card number (set by the rotary switch)
Multiple Output Streams
· Unlimited output streams for any one input channel
· Independent cropping, aspect ratio, color format, resolution, frame rate, de-interlacing and color adjustment settings for each individual stream